13
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CONNECTING ELECTRICAL DEVICES
The generator can supply both 230V AC and 12V DC.
AC POWER
1. Start the engine. See page 11.
2. Make sure the appliance is turned
off before connecting it to the
generator.
3. Set the breaker to ‘ON’.
4. Connect the appliance to the
generator starting with the device
that draws the most current.
CAUTION: MAKE SURE THAT THE APPLIANCE BEING CONNECTED IS IN
GOOD WORKING ORDER, IF IT BEGINS TO ACT ABNORMALLY OR STOPS
SUDDENLY, DISCONNECT IT FROM THE GENERATOR
CAUTION: MAKE SURE THE APPLIANCE DOES NOT EXCEED THE MAXIMUM
RATED LOAD FOR THE GENERATOR.
CAUTION: ANY DEVICE WITH CONTAINS AN INDUCTIVE LOAD E.G.
DEVICES THAT CONTAIN A MOTOR MAY REQUIRED MORE CURRENT ON
STARTUP.
