manualshive.com logo in svg

Clarke DK38, Assembly Manual, Page: 2 / 7

Share
Download
Clarke DK38 Assembly Manual Download Page 2

05_60162_B4

2

PRoPER ANCHoRING oF THE FRAME IS THE RESPoNSIBILITY oF THE CoNSUMER.

 

Clarke

®

 International

  

are not responsible for damage to the unit or the contents from acts of nature. Any kennel that is not anchored 

securely has the potential to cause damage. Periodically check the anchors to ensure stability of the kennel. 

Clarke

®

 International

 

cannot be responsible for any kennel damaged as a result of improper anchoring. 

NoTE: Your kennel and  cover can be quickly 

removed and stored prior to severe weather conditions

. If strong winds or severe weather is forecast in your area, we recommend 

removal of kennel. 

PRoPeR AncHoRinG And insTAllATion oF FRAme:

ATTenTion:

This kennel is manufactured with quality materials. It is designed to fit the fabric cover included. Please anchor the kennel carefully 

following the instructions in this manual. Proper anchoring, keeping cover tight and free of snow and debris is the responsibility of the 

consumer. Please read and understand the installation detail, warnings and cautions prior to beginning installation.

cAUTion:

Use 

CAUTIoN

 when erecting the frame. 

Risk of fire. Do not smoke or use open flame devices (including grills, fire pits, deep fryers, smokers or 

lanterns) in or around the kennel. DO NOT store flammable liquids (gasoline, kerosene, propane, etc.) in 

or around your kennel. Do not expose top or sides of the kennel to open fire or other flame source. 

WARninG:

Choose the location of your kennel carefully. 

DANGER: Keep away from electrical wires. 

Check for 

overhead utility lines, tree branches or other structures. Check for underground pipes or wires before 

you dig. Do not install near roof lines or other structures that could shed snow, ice or excessive run 

off onto your kennel. Do not hang objects from the roof or support cables. 

dAnGeR:

overall kennel is easily cleaned with a garden hose or soap and water.  A tight cover ensures longer life 

and performance. Always maintain a tight cover. Loose fabric can accelerate deterioration of cover fabric. 

Immediately remove any accumulated snow or ice from the roof structure with a broom, mop or other soft-

sided instrument. Use extreme caution when removing snow from cover- always remove from outside the 

structure. Do not use hard-edged tools or instruments like rakes or shovels to remove snow. this could 

result in punctures to the cover. Do not use bleach or harsh abrasive products to clean the fabric cover. 

Cover is easily cleaned with mild soap and water. 

cARe And cleAninG:

Summary of Contents for DK38








Reviews:

No comments