Clarke CWM20, Operating & Maintenance Instructions, Page: 5 / 12

5
ELECTRICAL CONNECTIONS
Connect the mains lead to a standard 230 Volt (50Hz) electrical supply through an
approved plug or a suitable fused isolator switch.
For your own safety, we recommend that this unit is fitted with a Residual Current Device
(RCD).
WARNING: THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in the mains lead are coloured in accordance with the following
code:
Green and Yellow - Earth
Blue - Neutral
Brown - Live
As the colours of the flexible cord of this appliance may not correspond with the
coloured markings identifying terminals in your plug, proceed as follows:
• Connect GREEN & YELLOW coloured cord to plug terminal marked with a letter
“E” or Earth symbol “ “ or coloured GREEN or GREEN & YELLOW.
• Connect the BROWN cord to the terminal marked “L” or coloured RED.
• Connect the BLUE cord to the terminal marked “N” or coloured BLACK.
Fuse Rating
The fuse in the plug for this appliance must be rated at 3 amps and any replacement
must be ASTA approved to BS1362.
If this appliance is fitted with a plug which is moulded onto the electric cable (i.e. non-
rewirable) please note:
1. The plug must be thrown away if it is cut from the electric cable. There is a danger of
electric shock if it is then inserted in a socket outlet.
2. Never use the plug without the fuse cover fitted.
3. Should you wish to replace a detachable fuse carrier, ensure that the correct
replacement is used (as indicated by marking or colour code).
4. Replacement fuse covers can be obtained from your local dealer or most electrical
stockists.