6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
10. Use the long beams (D) to
connect the two end assemblies
together as shown in Fig 3.
11. Use the centre support beam (F)
to connect the end assemblies
together.
12. Add the worktop support beam
(J), bending the flexible tabs to 90
degrees and slotting them into
place as shown in Fig 4.
13. Finally bend the tabs back 180
degrees to lock in place.
14. Fit the work top (L) in position
before continuing to assemble
the upper beams in the same way
as the lower beams.
