6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
10. Use the long support beams (B) to
connect the two end assemblies
together as shown in Fig 3.
11. Add the worktop support beam
(F), by bending the flexible tabs to
90 degrees and slotting them into
place as shown in Fig 4.
12. Finally bend the tabs back 180
degrees to lock securely as shown
in Fig 5.
13. Connect the centre support (C)
to the lower end beams (E) by
bending the flexible tabs to 90
degrees and slotting them into
place as shown in Fig 6. Finally
bend the tabs back 180 degrees
to lock in place.
