Clarke CUMB1 Assembly & Operating Instructions Download Page 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Universal Mobile Base.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase. 

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. 

This guarantee does not effect your statutory rights.

IN THE CARTON

Unpack and identify all components and hardware. Make sure there are no 
missing parts and that there is no shipping damage.

Qty

Description

Qty

Description

4

Long Side Rails

25

½” Bolt

4

Short Side Rails

25

Small Flange Nut

2

Castor Plate

2

Large Nut

2

Castor Bracket Corner

2

Large Flange Nut

2

Fixed Wheel Corner Bracket

2

2½” Cam Pivot Bolt 

2

Cam Lever

6

Self-locking Nut

2

Adjustable Foot

2

Pivot Rod Bolt

2

Castor

2

1¾” Wheel Axle Bolt 

2

Wheel

CUMB1 - Universal Mobile Base.fm  Page 2  Thursday, March 28, 2013  12:34 PM

Summary of Contents for CUMB1









Reviews: