2
INTRODUCTION
Thank you for purchasing this CLARKE Inspection Lamp.
Please read this manual thoroughly and follow the instructions carefully. Before attempting to use
the lamp, thoroughly familiarise yourself with the lamp & its operation. In doing so you will ensure
the safety of yourself and that of others around you, and you can look forward to the lamp giving
you long and satisfactory service.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12 months from the date of
purchase. Please keep your receipt which will be required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered with in any
way, or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be returned to us
without prior permission.
This guarantee does not effect your statutory rights.
SPECIFICATIONS
Model: .................................................................................................. CUH100
Part No: ............................................................................................... 3220823
Weight: .................................................................................................... 2.5 kg
Dimensions:(l x w x h) ............................................................ 1245 x 200 x 110
Nominal Light Output .......................................................................... 968 Lum
Lamp type ................................................. T8 G13 Fluorescent lamp (900mm)
Supply Voltage ............................................................................... 230v / 50Hz
Lamp rating ............................................................................................... 30 W
Fuse rating ............................................................................................. 3 amp
Cable length ............................................................................................ 5 m
This Under Bonnet Inspection Lamp incorporates a spring loaded telescopic bracket which mounts
under an open bonnet using foam rubber covers to prevent damage. A30W 900mm long fluorescent
tube with a tough composite clear guard gives complete engine bay illumination. The lamp can be
unclipped from the mounting bracket and used separately or hung via the 360deg swivel hook. The
lamp is supplied with 5 metres cable and a ASTA/BS approved 3-pin moulded plug.
