For Spare Parts and Service, please contact your nearest dealer,
or CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
or e-mail as follows:
PARTS: [email protected]
SERVICE: [email protected]
PARTS & SERVICE CONTACTS
Casters
1.
Align the 4 holes in either of the locking casters with the 4 holes located in
the lower shelf which are closest to the handle.
2.
Place a washer on to each of the M8 x 16 bolts and then insert bolts through
each of the holes of the caster and lower shelf.
3.
Place a lock nut onto each of the bolts and tighten firmly.
4.
Repeat steps 1-3 with the remaining 2 casters. These should go on the side
opposite the handle. Your trolley is now ready to use.
Finishing
Features
The lower two drawers may be locked (prevented from opening) by sliding the
lever at the rear of the top shelf appropriately.
The lid may also be locked using the key provided.
Specifications
Maximum total load
80kg
Dimensions (LxWxH)
855x525x908mm
Weight
46.5kg
Plastic inserts are
provided for insertion
into the ends of the
drawer handles. Push
these in, as shown,
firmly.