3
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
UNPACKING & OPERATION
Carefully remove the trolley from the packaging and check for any damage
which may have occured in transit.
Before assembling, please check contents against the following list of loose
items on page 4, and advise your Clarke dealer immediately if any parts are
missing. The keys to the top drawer are taped inside the unit.
TOOLS REQUIRED
•
Phillips Screwdriver
•
13 mm wrench
SAFETY PRECAUTIONS
•
Do not
leave the trolley unattended without the brakes being applied.
•
Do not
use on rough terrain. The trolley is designed for use on smooth level
flooring.
•
Do not
allow children to play with or ride on the trolley.
•
Do not
leave the trolley on any steep inclines.
•
Do not
use the trolley if any of the castors are damaged; have them
replaced immediately.
•
Always
ensure the load is favourably distributed, i.e. with heavy items on
the lower storage levels.
DURING USE
Close the top tray before locking with the key provided. The five draws are
held closed by the latch on each one. Always close the lid and the draws
before moving the trolley.
CAUTION: ONLY OPEN ONE DRAWER AT A TIME IF HEAVY TOOLS ARE
STORED INSIDE. OPENING MULTIPLE DRAWS COULD INCREASE THE RISK
OF THE UNIT TIPPING OVER.
CAUTION: ALWAYS APPLY THE BRAKES ON EACH REAR CASTER WHEN
THE TOOL TROLLEY IS NOT BEING MOVED AROUND. TAKE EXTRA CARE
WHEN MOVING THE UNIT AROUND IF THE FLOOR SURFACE IS NOT FLAT.
WARNING: NEVER EXCEED THE MAX LOAD CAPACITY AS THIS COULD
DAMAGE THE UNIT OR CAUSE PERSONAL INJURY.
TOTAL TROLLEY LOAD = 320KG. BOTTOM TRAY LOAD = 80 KG.
