3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SAFETY INSTRUCTIONS
• Spillages of abrasive material, which may be slippery, must be
cleaned up immediately to avoid injury.
• Replace or repair damaged parts- Use recommended parts only.
Non-authorised parts may be dangerous and will invalidate the
warranty.
• Remove loose clothing. Remove ties, watches, rings, other loose
jewellery and contain long hair.
• Always keep the blast nozzle directed at the workpiece.
• Keep all other persons away from the working area. Contact with a
high pressure blast or inhaling the dust generated is dangerous.
• DO NOT operate the blaster if any parts are missing or damaged as
this may cause failure and/or personal injury.
NOTE:
This manual is only for the soda blasting conversion kit, for full safety,
assembly and operating instructions please refer to the manual for the
Clarke CPSB100 or CPSB200.
WARNING: TURN OFF OR DISCONNECT FROM AIR SUPPLY BEFORE
SERVICING OR PERFORMING ANY MAINTENANCE AND WHEN UNIT IS
NOT IN USE. FAILURE TO COMPLY WITH THIS INSTRUCTION MAY DAMAGE
THE UNIT AND WILL INVALIDATE YOUR WARRANTY
WARNING: WEAR APPROVED EAR, EYE, HAND AND RESPIRATORY
PROTECTION WHEN OPERATING THE BLASTER. A FULL RANGE OF
PERSONAL SAFETY EQUIPMENT IS AVAILABLE FROM YOUR CLARKE
DEALER
Summary of Contents for CSBCT
Page 8: ......
