10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
USE
INTENDED USE
Your power file has been designed for sanding wood, metal, plastics and
painted surfaces only.
SWITCHING ON AND OFF
To switch the tool on, press the on/off
trigger switch.
To switch the tool off, release the on/
off trigger switch.
FOR CONTINUOUS OPERATION:
1. Press the on/off trigger switch.
2. Press the lock-on button.
3. Release the on/off trigger switch.
4. To switch the tool off when in continuous operation, press and release the
on/off trigger switch.
VARIABLE SPEED CONTROL
The variable speed control allows you to adapt the speed of the tool to the
workpiece material.
1. Set the variable speed control
knob to the required setting.
• Use a low speed setting when
using a fine grit, when working
with plastics or ceramics and
when removing painted or
varnished surfaces.
• Use a high speed setting when
using a coarse grit and when
removing a lot of material.
CPF13 Electric Power File.fm Page 10 Wednesday, February 29, 2012 10:50 AM