Clarke CPE15S, Operation & Maintenance Instructions Manual, Page: 5 / 14

-4-
Safety Precautions
•
These pumps are designed to pump Water Only . NEVER use for pumping flammable
liquids or chemicals of any kind.
•
ALWAYS ensure the pump is installed in a horizontal position with the outlet facing
vertically upwards, and that it is firmly anchored via its fixing screws.
•
ALWAYS ensure there is an adequate air flow around the pump. DO NOT mount it
in an enclosed atmosphere.
•
ALWAYS ensure all water pipes - supply or discharge, are adequately supported
where necessary, so as not to put a strain on the pump connections.
•
ALWAYS ensure the inlet to the pump is completely unrestricted.
•
ALWAYS ensure the pump is protected from the elements, neither the motor nor the
electrical terminal box is intended to be waterproof.
•
ALWAYS ensure that all pipes are protected against damage where necessary,
and that they are suitably lagged to avoid the possibility of freezing during cold
weather.
•
ALWAYS disconnect the pump from the electrical supply before any cleaning or
maintenance of the pump.
•
NEVER allow the pump to run dry, as this will cause serious damage to the pump
seals.
•
NEVER switch the pump ON when a swimming pool etc, is in use, i.e., when there is
person or animal in the pool.
WARNING:
As with all machinery, there are certain hazards involved with their operation
and use. Exercising respect and caution will considerably lessen the risk of
personal injury. However, if normal safety precautions are overlooked or ignored,
personal injury to the operator even damage to the pump or property, may
result. For your own safety and that of others around you, please read these
safety instructions in conjunction with the operating instructions, and before using
the pump.