Clarke Contractor CON24, Operating & Maintenance Instructions

Page: 2 / 16

2
Thank you for purchasing this CLARKE Cordless Impact Drill.
Before attempting to use the drill, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of
yourself and that of others around you, and you can look forward to the drill
giving you long and satisfactory service.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
PACK CONTENTS
• CON24 Cordless Impact Drill • 2 x 24volt 1,300 mAh battery pack
• Auxiliary handle • Magnetic bit holder
• 6 x HSS drill bits (various) • 6 x screwdriver bits (various)
• Battery charger
SPECIFICATIONS
Model Number ......................................... CON24
Hammer drill voltage ............................... 24 volts
Mechanical speed settings .................... 2
No load speed
- speed setting 1 ....................................... 0 - 500 rpm
- speed setting 2 ....................................... 0 - 1400 rpm
Torque settings .......................................... 18
Keyless chuck capacity .......................... 2 mm - 13 mm
Battery pack voltage .............................. 24 volts (1,300 mAh)
Charger voltage ...................................... 230VAC - 50Hz
Charging time .......................................... 1 hour
Please note that the details and specifications contained herein, are correct at the time of going to print. However, CLARKE
International reserve the right to change specifications at any time without prior notice.