11
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
6. Press and hold the spindle lock and use the pin spanner to tighten the
outer flange. Care should be taken also NOT to overtighten the outer
flange.
FITTING THE SIDE HANDLE
1. Fit the side handle by screwing it
into the threaded hole on either
left or right hand side of the angle
grinder.
OPERATION
WARNING: FRAGMENTS FROM A BROKEN/DETACHED DISC CAN CAUSE
SERIOUS INJURY. ALWAYS WEAR SUITABLE EYE & FACE PROTECTION.
WARNING: WHEN USING CUTTING DISCS, DO NOT STAND DIRECTLY IN
LINE WITH THE ROTATING DISC.
WARNING: DO NOT PUT SIDEWAYS PRESSURE ON CUTTING DISCS.
WARNING: ENSURE THAT THE WORKING POSITION ADOPTED DOES NOT
CAUSE OPERATOR FATIGUE WHICH MAY LEAD TO LOSS OF CONTROL OF
THE CUTTING DISC.
WARNING: ENSURE THE INTENDED CUTTING PATH IS CLEAR AND WITH
SUFFICIENT CLEARANCE BETWEEN THE GRINDER & SURROUNDING
OBJECTS.
WARNING: WHEN CUTTING, KEEP THE ANGLE GRINDER STRAIGHT TO
PREVENT SNATCHING OR JAMMING.
THE ON/OFF SWITCH
1. To start the angle grinder, depress
the trigger safety lock button (1)
before squeezing the trigger (2).
• The disc will start instantly. Always
maintain a firm grip with both hands.
2. To stop the angle grinder, release
the trigger.
WARNING: THE DISC WILL
CONTINUE TO ROTATE FOR A FEW SECONDS AFTER THE TRIGGER HAS
BEEN RELEASED.
