Clarke CON18LI Page 9 Operation & Maintenance Instructions Manual Download

Page: 9 / 16

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

ADJUSTMENTS

FORWARD/REVERSE

The forward/reverse switch is used to select the direction of rotation.

1. Use the forward/reverse switch to

select the direction of rotation.

2. Reverse should only be selected

when removing screws.

SAFETY LOCK OFF

The forward/reverse switch can be
used as the safety lock off button by
pushing it half way through the drill
body.

SPEED RANGE

Use the speed range selector to
select the range you want to use.

• Setting 1 - 0-350 rpm

• Setting 2 - 0-1250 rpm

NOTE:

Only use the speed range
selector when the chuck is
stationary.

WARNING: ALWAYS LOCK THE TRIGGER SWITCH IN THE OFF POSITION
WHEN THE DRILL IS NOT BEING USED OR ADJUSTMENTS ARE BEING MADE
TO THE SPEED OR TORQUE SETTINGS. THIS IS AN IMPORTANT SAFETY
FEATURE AND MUST BE OBSERVED.

CON18LI.fm Page 9 Monday, September 3, 2012 4:29 PM

Summary of Contents for CON18LI

















Search results

Summary of Contents for CON18LI

Reviews:

Related manuals for CON18LI

Brands by name

Popular brands

Clarke CON18LI, Operation & Maintenance Instructions Manual

Search results

Summary of Contents for CON18LI

Reviews:

Related manuals for CON18LI

Brands by name

Popular brands