3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
checking against the parts list. Should there be any deficiency or damage,
please contact your CLARKE dealer immediately.
PARTS LIST
ASSEMBLY
1. Place the tool tray in the slot on
the side of the seat frame.
2. Place the M8 inner hexagon nuts
in the holes on each corner of the
frame and screw the castor
wheels into the nuts, making sure
the 2 nuts on the tool tray side
clamp the tray to the frame.
Check that all nuts are tight and
secure before using this seat.
Your mobile seat is now ready for use.
SPECIFICATIONS
The seat has 3 drawers with ball
bearing runners built in and 3 circular
holders for aerosols. The 3 drawers have
a length of 300mm, with a clearance of
250mm, width of 150mm and depth of
40mm. The
aerosol holders are 70mm in diameter
with a depth of 52mm.
1
1 x 3 Drawer Set and Seat Frame
3
4 x M8 Inner Hexagon Nuts
2
1 x Tool Tray
4
4 x 3” Castor Wheels
Model Number
CMUS3
Dimensions (D x W x H, Incl. Casters)
400mm x 400mm x 400mm
Weight
8.55kg
Underside Clearance
95mm
Safe Working Load
136kg/300lbs
Summary of Contents for CMUS3
Page 4: ......