4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
GENERAL SAFETY RULES
6.
Dress properly.
Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away
from moving parts. Loose clothes,
jewellery or long hair can be
caught in moving parts.
7.
A laser beam
can cause serious
eye injury. Never look into the
laser outlet.
POWER TOOL USE AND CARE
1.
Do not force the power tool.
Use
the correct power tool for your
application. The correct power
tool will do the job better and
safer at the rate which it was
designed.
2.
Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is
dangerous and must be repaired.
3.
Disconnect the plug from the
power source before making any
adjustments, changing
accessories, or storing power
tools.
Such preventive safety
measures reduce the risk of
starting the power tool
accidentally.
4.
Store idle tools out of the reach of
children and do not allow persons
unfamiliar with the power tool or
these instructions to operate the
power tool.
Power tools are
dangerous in the hands of
untrained users.
5.
Maintain power tools
. Check for
misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect the power tools operation.
If damaged, have the power tool
repaired before use. Many
accidents are caused by poorly
maintained power tools.
6.
Keep cutting tools sharp and
clean.
Tools with sharp cutting
edges are less likely to bind and
are easier to control.
7.
Use the power tool and
accessories in accordance with
these instructions and in the
manner intended, taking into
account the working conditions
and the work to be performed
.
Use of the power tool for
operations different from
intended use could result in a
hazardous situation.
ADDITIONAL SAFETY
RULES FOR MITRE SAWS
1. Make sure all locking knobs and
clamp handles are tight before
starting any operation.
2. Do not operate the machine
without the guard in position, or if
the guard does not function
correctly or is not maintained
properly.
3. Never use your saw without the
kerf plate.
4. Never place either hand in the
blade area when the saw is
connected to the electrical
power source.
