19
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
When sharpening manually, only file the front rake of each tooth over a
distance of about 5-7mm.
ALWAYS keep the original shape of the tooth. Take care not to make sharp
notches at the root of the tooth with your file.
Check the blade carefully for cracks.
NOTE:
Replacement blades are available from your CLARKE dealer as
Part No 3401994.
FAULT FINDING
Problem
Cause
Solution
Machine will not
operate.
No power supply.
Check supply and rectify.
Switch is faulty.
Consult your CLARKE dealer.
Fuse in plug has blown.
Check and replace.
Motor is faulty.
Consult your CLARKE dealer.
Motor becomes
hot.
Unduly heavy use.
Reduce the force applied to
the saw. Let the machine do
the work.
Air vents have become
blocked.
Clean out air vents using
compressed air or clean
with a dry cloth.
Low supply voltage.
Ensure supply voltage is
correct. If an extension
cable is used, ensure it is of
the correct rating and is fully
unwound.
Heavy internal
sparking.
Motor fault such as worn
brushes.
Return to your CLARKE
dealer for repair.
Excessive vibration Blade not mounted
correctly.
Check seating of blade and
securing discs, and tightness
of retaining nut.
Saw motor bearings worn.
Return to your CLARKE
dealer for repair.
Burns showing on
the cut timber.
Incorrect or blunt saw
blade.
Replace blade with the
correct replacement.
Check and tighten blade as
necessary.
Summary of Contents for CLS505
Page 24: ......
