10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
STEP 4: SQUARE AND ANCHOR THE FRAMES
1. Check the measurements of the frame are 10’ at both the front and back
corners, as well as across the center.
2. Take a diagonal measurement as shown in Diagram F. When these two
measures are equal the frame is square. Adjust the frame until they are
equal to within 1".
3. Once equal, check the width measurement again to ensure all widths are
equal at 10'.
4. Next, install the anchors
(Parts #16, #17 & #18) at the
4 corner bent legs by
screwing the removable
anchor (#16) into the
ground on the inside of the
shelter.
5. Secure with cable (#17)
and cable clamp (#18) (as
shown in Diagram G).
Summary of Contents for CIG81015
Page 16: ......
