Clarke CHT878 User Instructions Download Page 4

Page: 4 / 4

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

ADJUSTMENT

If the internal claws of the rivet gun
fail to grip the stem of the rivet, the
riveter will need adjusting.

1. Loosen the locking nut and rotate

the riveter shield clockwise to
tighten (anti-clockwise to loosen).

2. Open the handles to relax the

riveter and to tighten the internal
claws.

3. Re-tighten the locking nut.

Summary of Contents for CHT878

Page 1: ...USER INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0518 ISS 1 HAND RIVETER WITH STEM COLLECTION TANK MODEL NO CHT878 PART NO 1801878...

Page 2: ...red as proof of purchase This guarantee is invalid if the product is found to have been abused or tampered with in any way or not used for the purpose for which it was intended Faulty goods should be...

Page 3: ...ter as wide as possible This will enable you to insert the rivet stem into the riveter as far as it will go 4 Ensure that the riveter is perpendicular to the workpiece and the flange of the rivet is p...

Page 4: ...T If the internal claws of the rivet gun fail to grip the stem of the rivet the riveter will need adjusting 1 Loosen the locking nut and rotate the riveter shield clockwise to tighten anti clockwise t...