2
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INTRODUCTION
Thank you for purchasing this CLARKE Rivet Gun. Before attempting to use this
product, please read this manual thoroughly and follow the instructions
carefully. In doing so you will ensure the safety of yourself and that of others
around you and you can look forward to your purchase giving you long and
satisfactory service.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission. This guarantee does not effect your
statutory rights.
FITTING AND STORING THE NOZZLES
The CHT877 rivet gun is equipped with a choice of 5 different size nozzles to suit
different rivets. Choose the rivet to be used for the job.
The sizes available are:
•
3/32” (2.4 mm)
•
1/8” (3.2 mm)
•
5/32” (4.0 mm)
•
3/16” (4.8 mm)
•
1/4” (6.4 mm)
NOTE:
The dimensions are
engraved on each one.
1. Screw your chosen nozzle into the tip of the rivet gun, finger tight.
2. Always store the unused nozzles by screwing them back into the rivet gun
for safe keeping.
