(b) Ensure there are no old or disfigured
staples or nails in the gun, as these
could cause it to jam
Slide the appropriate staples into the
carriage as shown below
F
or Sales and Service, contact your Clarke dealer. For details of
your nearest dealer contact:
CLARKE International on
01992 565300
or e-mail:
MAINTENANCE
When you have finished using the gun,
always remove any unused staples or
nails.
(c) Replace the pressure rod assembly,
against spring pressure ensuring the
locating tab is correctly located
in the slot in the gun body.
2. Operating the Gun
The gun is operated by first, placing it
directly over the point to be stapled, and
holding down firmly with the palm of
one hand, whilst pressing down firmly
and progressively on the handle (A),
until the gun ‘fires’, and the staple or
nail is inserted.
3. Using The Wire Attachment
Undo the nut securing the wire
attachment, and position the
attachment according to the height
desired. A scale is provided to assist in
setting a specific height, measurinjg
up to 3/8” (10mm). Nip up the nut
before use.
ACCESSORIES
Replacement staples and nails are
available from your CLARKE dealer,
quoting the following part numbers:
Item
Part No.
Nails 8mm
1800205
Nails 14mm
1800210
Round Staples 12mm
1800230
Square Staples 4mm
1800235
Square Staples 6mm
1800240
Square Staples 8mm
1800245
Square Staples 10mm
1800250
Square Staples 12mm
1800255
Square Staples 14mm
1800260
SPARE PARTS
Description
Part No.
Pressure Rod Assembly
CHT50901
Hemnall Street, Epping, Essex CM16 4LG
