Guide pushed
Up To Locator
Bring the handles together until the respective
roller comes into contact with the guide, continue
to apply pressure to the handles until the required
bend is achieved.
To produce a 180º bend, continue moving the
handles together until the two ends of the pipe
are parallel.
Fig. 2
MAINTENANCE
Clean tool after use and apply a small amount of oil occasionally to the rollers, this will help
to keep the tool working smoothly and efficiently.
PARTS & SERVICE TEL: 020 8988 7400
or e-mail as follows:
PARTS: [email protected]
SERVICE: [email protected]
4
