manualshive.com logo in svg

Clarke CHL1260C, Operating And Maintenance Instructions Manual

Share
Download
Clarke CHL1260C Operating And Maintenance Instructions Manual Download Page 8

8

MAINTENANCE

GENERAL

Clean the lens by wiping with a clean, dry cloth. DO NOT use abrasive
cleaners/solvents.

Check the power cable for wear or damage. If the plug is broken, withdraw
the lamp from service & have it repaired by a qualified electrician.

REPLACING THE BULBS

1. Ensure the lamp is switched off

and isolated from the electrical
supply by unplugging from the
socket before attempting to
replace a bulb. Allow the lamp
to cool down for a few minutes
after switching off before
performing any maintenance
tasks.

2. Release the clip and hinge the

front of the lamp away as
shown in Fig 3.

3. Release the halogen bulb by

pushing it into one of the mountings before
lifting it away.

4. Holding the new bulb with a soft cloth,

carefully locate one end into the
mounting and seat the other end of the
bulb against the metal pin in the other
mounting. Do not use force when installing
the bulb.

5. Replacement bulbs can be obtained from

your local Clarke dealer. A spare 230W
bulb is carried aboard the tripod inside a
plastic holder as shown in Fig 4.

NOTE: Do not touch the bulbs with the fingers

as

 this will cause damage. If it has been

touched, wipe it carefully with a soft cloth
dampened with methylated spirits.

STORAGE

Store in a dry place protected from the weather.

Fig 4

Fig 3

Summary of Contents for CHL1260C













Reviews:

No comments

Brands by name

Popular brands

Load more brands