Clarke CHG1600 User Instructions Download Page 5

5

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

7. Be aware that heat generated by the hot air gun could cause nearby 

materials to ignite - particularly in confined spaces. Take all necessary 
precautions - have a fire extinguisher or means to extinguish a fire to hand.

8. Be aware that fumes given off by paint could be toxic. Take all necessary 

precautions - consult paint manufacturer etc where necessary.

9. Do not stand on a soft surface. The air gun could topple over or the air 

intakes become blocked.

10. Always ensure that air can circulate around the hot air gun and that the air 

vents are unobstructed.

11. Be aware that heat may be conducted to combustible materials that are 

out of sight. Do not apply heat to the same place for a long time.

12. Always switch the hot air gun OFF after use and stand it upright while it 

cools. Place the gun where it cannot cause damage or be accidentally 
touched by persons in the area.

ENVIRONMENTAL PROTECTION

Through the purchase of this product, the customer is taking on the 
obligation to deal with any waste electrical/electronic equipment in 
accordance with the WEEE Regulations in relation to the treatment, 
recycling, recovery and environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general 
household waste but be disposed of according to the laws governing Waste 
Electrical and Electronic Equipment (WEEE) at a rcognised disposal facility.

Summary of Contents for CHG1600













Reviews: