4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
UNPACKING & ASSEMBLY
Unpack the components on a clean flat area of hard standing, and ensure
that all parts are present according to the packing list, as follows:
Visually inspect all components to ensure that no damage was suffered in
transit. Any deficiencies should be reported to your CLARKE dealer
immediately.
TOOLS REQUIRED
• Open or ratchet ring spanner (19 mm) or an adjustable wrench.
1
1 x Column assembly
6
1 x Mounting plate
2
1 x Rear cross-member
7
1 x Mounting plate handle
3
2 x Side arms
8
4 x Mounting Arms
4
2 x Castors with brake
9
1 x Parts tray
5
2 x Wheels
10
1 x Fixings kit including nuts, bolts,
washers and locating pin.
