15
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CARBON BRUSHES
To maintain maximum efficiency of the motor, we recommend changing the
carbon brushes every 60 hours of operation. Replacement carbon brushes are
available from your Clarke Dealer.
To inspect or replace the carbon brushes:
1. Unscrew and open the motor
cover on the right (Fig. N).
2. Carefully take out the two carbon
brushes using pliers and replace
with new brushes.
3. Replace the motor cover and
secure with the screws.
DRIVE BELT
Inspect the drive belt every 60 hours
of use. If the drive belt shows signs of
drying out, cracking, tearing or
improper tracking, it must be
replaced. To replace the drive belt,
unscrew and open the belt cover on
the left. Replace with an identical
replacement belt and replace the
drive belt cover.
BEARINGS
Bearings that become noisy (due to heavy load or abrasive material
damage) must be replaced by a qualified technician as soon as possible to
avoid overheating or motor failure.
Summary of Contents for CEP450
Page 20: ......
