C. Battery Charging
When plugging the battery into the
base unit, ensure it is entered the
correct way round, i.e. +ve to +ve, the
signs being marked on both the
battery and base unit. When plugged
in correctly the battery should sit as
shown in the illustration opposite.
When the battery is charging, the red
LED (arrowed) will illumnate. Remove
the battery when it has extinguished.
6
Speed Range
Models CCD180 and CCD 240
ONLY are provided with 2 speed ranges. The selector
lever is shown at (f). Operate this lever ONLY when the chuck is stationary.
Hammer Action
BATTERY CHARGING AND CARE
Your Clarke Cordless drill is supplied with a 3 hour battery charger. To detach the
battery from the drill, press the two lugs, either side of the battery simultaneously
whist gently pulling downwards.
A. Three Hour Charger
(Standard, with all models)
This is a two piece unit incorporating
a transformer fitted with a 2 core lead
and a jack for plugging into the
separate base unit.
B. Electrical Connections
The transformer plugs directly into a
standard domestic 13Amp supply. A
jack, fitted to the end of the twin core
cable, plugs into the base unit.
Model CCD 240
ONLY is provided with
a hammer action facility.
Turn the ring shown at (g) in the
illustration opposite when this facility is
required.
NOTE:This should always be performed
when the chuck is stationary.
