SAFETY PRECAUTIONS
IMPORTANT
Failure to follow these precautions could
result in personal injury, and/or damage to
property.
❐
When operating this tool, ALWAYS wear:
a.
approved impact resistant SAFETY
GOGGLES. (Eye glasses are NOT
safety glasses)
b.
a DUST MASK
c.
EAR DEFENDERS
d.
a good pair of INDUSTRIAL GLOVES
❐
ALWAYS
disconnect the tool when not
in use, and before carrying out any
maintenance
❐
ALWAYS
keep a safe distance between
yourself and other people when using
the tool.
❐
ALWAYS
maintain the tool with care. Keep
it clean for best and safest performance.
❐
NEVER
wear ill fitting clothing, remove
watches and rings.
❐
Quick change couplings should not be
located at the tool. They add weight
and could fail due to vibration.
❐
DO NOT
over-reach. Keep your proper
footing and balance at all times.
❐
DO NOT
force or misuse the tool. It will
do a better and safer job at the rate for
which it was designed.
❐
DO NOT
abuse hoses or connectors.
NEVER carry a tool by the hose, or yank
it to disconnect from the air supply. Keep
hoses away from heat, oil and sharp
edges. Check hoses for leaks or worn
condition before use, and ensure that
all connections are secure.
❐
DO NOT
exceed 90 PSI at the tool.
❐
DO NOT
modify the tool in any way.
❐
DO NOT
remove any labels. Damaged
labels should be replaced.
❐
This tool vibrates with use. Vibration may
be harmful to your hands or arms. Stop
using the tool if discomfort, a tingling
feeling or pain occurs. Seek medical
advice before resuming use.
❐
ALWAYS
use screens to protect people
in the vicinity from flying debris.
❐
NEVER point the tool at anyone.
- 3 -
Please read these instructions
carefully before operating the tool
Thank you for purchasing this CLARKE Angle
Head Die Grinder, designed for use when
carrying out ‘smart’, localised repairs to
vehicle bodywork etc.
Before using the Grinder, please read this
leaflet thoroughly and follow the instructions
carefully, in doing so you will ensure the
safety of yourself and that of others around
you, and you can look forward it giving long
and satisfactory service.
GUARANTEE
This CLARKE product is guaranteed against
faulty manufacture for a period of 12
months from the date of purchase. Please
keep your receipt as proof of purchase. This
guarantee is invalid if the product is found to
have been abused or tampered with in any
way, or not used for the purpose for which it
was intended.
Faulty goods should be returned to their
place of purchase, no product can be
returned to us without prior permission. This
guarantee does not effect your statutory
rights.
WARNING
Compressed air can be
dangerous. Ensure that you are
thoroughly familiar with all
precautions relating to the use
of compressors and
compressed air supply.
ACCESSORIES
A wide range of Airline accessories is available, including Filter/Regulators, Lubricators,
High Pressure Hoses from 5 to 100 Metres, etc. Contact your CLARKE dealer for further
information, or CLARKE International Sales Department on 01992 565300
SPECIFICATIONS
Air Inlet
1/4" BSP
Min. Hose Size (ID)
8mm (5/16")
Ave. Air Consumption
10 CFM
Max. Speed
25,000 RPM
Air Pressure Max.
90 PSI (6.1 BAR)
Vibration Level
>2.5m/s
2
Part No.
3110815
- 6 -
RECOMMENDED AIR SUPPLY CONNECTION
Please note that the details and specifications contained herein, are correct at the time of going to
print. However, CLARKE International reserve the right to change specifications at any time without
prior notice. Always consult the machine’s data plate
