4
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
SAFETY PRECAUTIONS
CAUTION: FAILURE TO FOLLOW THESE PRESCAUTIONS COULD RESULT IN
PERSONNAL INJURY, AND /OR DAMAGE TO PROPERTY
WORK ENVIRONMENT
1. Keep the work area clean and tidy.
2. Dress appropriately - Do not wear loose clothing or jewellery. Tie long hair
out of the way.
3. Keep children and visitors away - Do not let children handle the tool.
Make sure that any other persons in the work area are dressed suitably
and are wearing eye and ear protectors.
4. Do not operate an abrasive tool where there are flammable vapours.
5. Keep the air supply hose away from heat, oil and sharp edges.
6. Do not fit the tool to any stand or clamping device that may damage the
tool.
GENERAL USE
1. Stay alert and use common sense - do not use the tool when you are tired
or under the influence of alcohol, drugs or medication.
2. Always wear eye protection when using the tool - eye protection must
provide protection from the front and the side.
3. Always wear ear protectors when using the tool.
4. Do not over-reach - keep proper footing and balance at all times.
5
Never use any type of bottled gas as a source of power for the tool.
6. Do not connect the air supply hose with your finger on the trigger of the
tool.
7. Do not exceed the maximum pressure for the tool: 90 psi / 6.2 bar.
8. Check hoses for leaks or worn condition before use and ensure that all
connections are secure.
9. Do not use the tool for any other purpose than that described in this
booklet.
10. Do not carry out any alterations or modifications to the tool.
11. Always disconnect from the air supply when:
•
Performing any maintenance.
•
The tool is not in use.
