FILLING WITH OIL
Fill the in-line oiler with oil using a suitable oil dispensing bottle via the
screw-in filler plug on the side of the polymer bowl. Make sure the airline is not pressurized
when filling with oil. Always use with Clarke airline oil. (Part No 3050825).
CARE AND MAINTENANCE
A build-up of moisture in the air compressor will accelerate
wear and corrosion in airline tools. Ensure any moisture is drained from
the compressor
routinely and that the inlet filter is kept clean. NEVER use solvents to clean the in-line oiler
bowl. There are no user serviceable parts on this product.
CLARKE GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a
period of 12 months from the date of purchase. Please keep your receipt as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered with in any
way, or not used for the purpose for which it was intended. Faulty goods should be returned to
their place of purchase, no product can be returned to us without prior permission. This guarantee
does not affect your statutory rights.
PARTS & SERVICE TEL 020 8988 7400
CLARKE INTERNATIONAL, Hemnall Street, Epping, Essex CM16 4LG
CAT150 In-Line Oiler
FITTING & MAINTENANCE
INTRODUCTION
Thank you for purchasing this CLARKE In-Line Oiler. Before attempting to use this product,
please read this manual thoroughly and follow the instructions carefully. In doing so you will
ensure the safety of yourself and that of others around you, and you can look forward to
your purchase giving
you long and satisfactory service.
SPECIFICATION
Max Pressure 90psi (6.2 bar)
Air inlet/Outlet Size
¼”BSP (female in/male out)
Dimensions
35 x 57 mm / Weight 90 g
This in-line oiler is built to operate in an environment which does not 60
o
C and the
compressed air is not contaminated with solvents to such an extent as to cause damage to
polymer components.