8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CONNECTING THE AIR LINE
1. Remove the protective plug from
the air inlet and connect a suitable
hose as shown.
2. A gauze filter is fitted within the air
inlet. Ensure this is always in place
and is kept clean. The air line is
connected to the adapter,
preferably via a quick release
coupling (not supplied).
3. Connect the other end of the hose
to the compressed air supply.
4. Ensure the trigger is NOT depressed
when connecting the air line.
5. Turn on the air supply and check
for air leaks. Rectify any found
before proceeding.
• PTFE tape may be useful for
sealing threaded connections.
6. If required, connect an in-line mini oiler to the airline close to the air tool.
• A mini oiler helps to prolong the life of any air tool.
7. If a mini-oiler is not being used, run a few drops of oil through the air tool
before use. It can be entered through the airline inlet or via the hose at the
nearest connection to the air supply.
• Your sabre saw is now ready for use
• You can fit a whip hose with a quick fit coupling if required
(available from your Clarke dealer.)
USEFUL AIRLINE ITEMS FROM THE CLARKE RANGE
CAT150 Mini-Oiler:- Part No 3120164
8mm Rubber Whip Hose:-Part No 3120104
CAT58 6mm Recoil Hose with 1/4”bsp connectors (25 feet):-Part No 3110458
CAT59 6mm Recoil Hose with 1/4”bsp connectors (50 feet):-Part No 3110459
CRH9 9metres professional recoil hose:-Part No 3120100
CAR20PC Manual Air Hose Reel:-Part No 3126250
CAR15PC PVC hose in moulded case with auto re-wind:-Part No 3126000
See the latest catalogue for details of snap couplings & pressure gauges
Summary of Contents for CAT118
Page 16: ......
