Clarke CARS1 Operation & Maintenance Instructions Download Page 2

Page: 2 / 4

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for selecting this Clarke roller stand.

Read this manual before use and save it for future reference.

SAFETY

• Minimum Working Height 690 mm - Maximum Load 60 kg.

• Maximum Working Height 1050 mm - Maximum Load 45 kg.

• Make sure that the lock handle is properly tightened before use.

• Do not use the stand as a step ladder or scaffold.

• Never use the product if any parts are missing.

ASSEMBLY

ATTACH THE FEET

ATTACH THE LOCK HANDLE

Summary of Contents for CARS1

Page 1: ...OPERATION MAINTENANCE INSTRUCTIONS LS1117 ISS 2 ORIGINAL INSTRUCTIONS ROLLER STAND MODEL NO CARS1 PART NO 6500980 ...

Page 2: ...this manual before use and save it for future reference SAFETY Minimum Working Height 690 mm Maximum Load 60 kg Maximum Working Height 1050 mm Maximum Load 45 kg Make sure that the lock handle is properly tightened before use Do not use the stand as a step ladder or scaffold Never use the product if any parts are missing ASSEMBLY ATTACH THE FEET ATTACH THE LOCK HANDLE ...

Page 3: ...1 Open the legs of the stand fully For increased stability always push the workpiece over the roller from the rear of the stand as shown ADJUST THE HEIGHT 1 Rotate the lock handle counterclockwise to loosen the roller head 2 Lift the roller head to the correct height between 690 1050 mm 3 Rotate the lock handle clockwise to lock the roller into position ...

Page 4: ......