TIMER Button
Press button to set
the switch ON/OFF
time, or to cancel
timing.
SWING Button
Press button to
determine the air
delivery in swinging
or fixed mode.
FAN SPEED Button
Press button to
select high, middle
or low air delivery.
MODE Button
Press button to
select cooling or
drying mode.
TIME Button
Press button
to set the time
TEMP Button
Press button to
set the room
temperature
POWER
Power ON
i n d i c a t o r
LED
WATER
Water full
i n d i c a t o r
LED
ON/OFF Button
Press button to turn
the machine ON
and OFF
Fan Speed Indicator
Louvre Indicator
Operation Mode
Indicator
Display of preset temperature and failure code
When SET is displayed, the displayed digits indicate
the preset temperature
When FAULT is displayed, the displayed digits indicate
the failure code
The displayed digits
indicate the remaining
time of ON/OFF operation
CONTROL PANEL
OPERATION
Cooling and Dehumidifying Operation
The operating range for cooling operation is, 16°C-31°C and the operating range for
dehumidifying is 20°C-31°C.
Connecting To The Electrical Supply
It is recommended to connect the mobile air conditioner to an electric supply not
used for other appliances.
Insert the plug into the 13amp socket, an audible warning (two beeps) should be
heard, after hearing the warning, wait for two seconds, then press the
(ON/OFF)
button, the unit should now run.
Cooling Operation
1. Ensure that the drain tank is properly installed in the unit.
2. Press the
(Mode) button to choose the cooling mode, LCD will display
cool.
During the cooling operation, the exhaust duct should be directed to the outside
through an open window etc.
3. Repeatedly press the
(Temp) button to set the room temperature.
4. Press the
(Fan) button to select the fan speed, (High, Middle or Low).
5. Press the
(Swing) button to adjust the air delivery direction, this can be
static in one direction or can be oscillating.
Press the swing button once,
will be displayed in the LCD, and the air flow will
be oscillating from side to side. To set the air flow in one direction only, wait until the
air is blowing in the required direction, and press the swing button again.
NOTE: to maintain efficient cooling, draw the window blinds/curtains, if the room is
directly exposed to strong sun.
Also DO NOT site the air conditioner in direct sunlight, or other heat source.
Dehumidifying Operation
1. Ensure doors and windows are closed to aid the effectiveness of the unit.
2. Ensure the drain tank is correctly installed.
3. Repeatedly press the
(Mode) button until the LCD reads DRY, in this mode
the fan speed cannot be adjusted.
NOTE: when used as a dehumidifier only, it is not necessary to use the exhaust duct.
Time Set Function
Automatic Start Time
Ensure the machine is switched off and is plugged into the main electrical supply,
1. Press the
(Timer) button, the LCD will show
, press the
(time)
button and select the start time as required. The setting range is 1 - 12 hours.
Auto Swing Function
1. Press the
(Swing) button, LCD will show
, the vertical louvres will start to
swing automatically.
2. Press the
(Swing) button again, the symbol
, will disappear and the
vertical louvres will stop swinging.
-9-
-6-
