5
UNPACKING & ASSEMBLY
Before assembling, please check contents against the following list and
advise your dealer immediately if any parts are missing. See Parts Diagram &
Component Parts list on pages 22 & 23.
1 x Stove Body
1 x Top Plate with fire rope surrounds
4 x Legs
2 x Cooking Lids
1 x Chimney Connection
1 x Lid Handle
1 x Hearth Plate
1 x Door with hinge pins
1 x Fixings Kit
1 x Lid Support Plate (De-luxe only)
1 x Baffle (De-Lux only)
TOOLS REQUIRED
Phillips screwdriver
13 mm spanner
Clarke Fire Cement
A full range of flue pipes and fire cement is available from your dealer.
WARNING: DUE TO THE WEIGHT OF THE STOVE IT IS RECOMMENDED
THAT TWO PEOPLE PERFORM THE UNPACKING AND ASSEMBLY.
Unpack and remove the
components from inside the stove.
1. Place the stove on a soft
surface such as the packing
materials from the crate and tilt
the stove body back on end.
2. Attach the rear legs using the
largest nuts & bolts supplied.
3. Attach the hearth plate to the
front of the stove using the
medium sized bolts and attach
the front legs to the hearth
plate as shown in Fig 1.
4. Sit the stove upright and attach
the front door by locating the
hinge pins into their holes.
Fig 1
