Clarke BC320C, Operating Instructions Manual, Page: 5 / 20

ELECTRICAL CONNECTIONS
BC120C, BC130C and BC210C
These Chargers are provided with a standard (BS1363) 13 amp plug, for use with a
standard 230V 50Hz domestic supply.
The fuse in the plug for these appliances must be rated at 13 amps.
BC320C, BC410E and BC520N
Connect the three core mains lead to a suitable industrial supply isolator, or heavy
duty plug. These chargers must be connected to a supply having a rated capacity
of greater than 13 Amps. A normal 13 Amp (BS1363) plug must NOT be used.
Note: The maximum input currents for these units are:
BC320C - 20 amps • BC410E - 25 amps • BC520N - 33 amps
WARNING: This appliance must be earthed.
IMPORTANT: The wires in this mains lead are coloured in accordance with the
following code:
GREEN AND YELLOW - EARTH (E )
BLUE - NEUTRAL (N)
BROWN - LIVE (L)
As the colours of the flexible cord of this appliance may not correspond with the
coloured markings identifying terminals in your plug, proceed as follows:
• Connect GREEN AND YELLOW coloured cord to plug terminal marked letter
‘E” or Earth Symbol ( ) or coloured or Green and Yellow.
• Connect BROWN cord to plug terminal marked letter ‘L’ or coloured Red.
• Connect BLUE cord to plug terminal marked letter “N or coloured Black.
ASSEMBLY
Models BC320C and BC520N require the handle and wheels to be assembled
before use.
Locate the Handle at the back of the upper panel and secure with the four self
tapping screws provided.
Thread the axle into its housings at the bottom of the unit, then slide a wheel on to
each end. Retain in position by tapping on the retaining washer supplied, ensuring
the tines of the washers point outwards.
5 5 5 5 5