Clarke BBQ3 User Manual Download Page 13

13

LIGHTING THE BBQ

1.

Turn all control knobs clockwise to the OFF position.

2.

Open the gas valve on the LPG bottle.

3.

Set the regulator switch to the on position (straight up).

4.

Lift open the barbecue lid.

5.

Push and turn the control knob anticlockwise to the spark position, it will generate a spark 
and light the burner.

• Try several times if the burner does not light on the first occasion.

6.

If the Burner does not light, turn the control knob to the OFF position and wait 5 minutes, then 
repeat Step 3.

7.

To adjust the flame, turn the control knob to LOW and HIGH position.

8.

Turn the control knobs to the OFF position to shut down the burner. 

9.

The side burner control works in the same way.

NOTE: 

• The lid must always be open when lighting the burner.

• Use oven gloves and sturdy, long handled barbecue tools when cooking on the grill.

• Be prepared if an accident or fire should occur. Know where your First Aid kit and fire 

extinguishers are and how to use them correctly.

• Keep any electrical cables and the gas supply hose away from any hot surfaces.

• The gas bottle should only be changed by a competent person.

ENERGY SAVING TIPS 

•    Turn the gas off as soon as you have finished cooking.

•    Preheat the barbecue for 5 to 10 minutes only. 

•    Do not use a higher setting than required.

•    Do not cook with the lid down using the maximum heat settings.

STORAGE

Your gas bottle must be stored outdoors in a well-ventilated area and must be disconnected 
from your barbecue when not being used. Ensure that you are outdoors and away from any 
sources of ignition before attempting to disconnect your gas bottle from your barbecue.

When using your barbecue after a period of storage, check for gas leaks and for any 
obstructions in the burner etc. before using. Also follow the cleaning instructions to ensure the 
barbecue is safe. If the barbecue is stored outdoors check that the barbecue is free from any 
obstruction (insects etc.) as this may affect the flow of air.

NEVER STORE THE GAS BOTTLE INSIDE THE COMPARTMENT.

WARNING: READ ALL SAFETY INFORMATION IN THIS MANUAL BEFORE LIGHTING THE 
BARBECUE.

Summary of Contents for BBQ3

















Reviews: