6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SPECIFICATION
AIR SUPPLY
For best results, the air supply to the spray gun must be clean and dry, with no
oil or water contamination. Follow the air compressor manufacturer’s
guidelines on installation and operation to ensure that your air supply is as
clean as possible.
The compressed air supply line to the spray gun must be fitted with a filter
capable of removing any oil or water together with a suitable pressure
regulator.
Higher pressure and contaminated air will shorten the spray gun life due to
faster wear and could become a safety hazard.
Water in the air line will also cause damage and may contaminate the paint
being used. Therefore ensure the air supply is properly filtered.
Line pressure, or supply hose inside diameter, should be increased to
compensate for unusually long air hoses (over 10m). Minimum hose diameter
should be 6mm (¼") ID, and fittings should have the same inside dimensions.
The air inlet used for connecting air supply has a standard ¼” BSP thread.
Container Volume
1000 ml
Air Inlet Connection
1/4” BSP
Minimum Compressor Size
3 HP
Typical Operating Pressure
30-50 psi
Maximum Operating Pressure
50 psi
Paint Delivery
160-240 ml/min
Weight
373 g
Depth x Width x Height
175 x 115 x 290 mm
Air Consumption
430 l/min
Nozzle Size
1.7 mm
