5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
16. Take care that when starting work, the blow gun may recoil back towards
the user.
TRANSPORT & STORAGE
1. Never carry the blow gun by the air hose or with your finger on the trigger.
2. When not in use the blow gun should be disconnected from the air supply
and stored in a dry place out of the reach of children.
3. Avoid storing the tool where the temperature is below 0
o
C.
Please keep these instructions in a safe place for future reference.
BEFORE USE
1. Ensure the compressor is turned
off.
2. Connect a suitable hose as shown
to the air inlet connector of the
blow gun.
3. Connect the other end of the hose
to the air supply.
4. Turn on the air supply and check
for any air leaks. Rectify any found
before proceeding.
• PTFE tape may be useful for sealing any threaded connections.
5. Your blow gun is now ready for use.
• You can fit a whip hose with a quick fit coupling if required, available
from your Clarke dealer.
6. Set the compressed air pressure at the airline regulator to suit the type of
work being done.
Summary of Contents for Air CAT149
Page 8: ......
