7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
• Remove the test leads from the meter before you
open the battery door or measure AC current.
• Do not operate the meter with the battery door or
portions of the case removed or loosened.
• To avoid false readings, which could lead to
possible electric shock or personal injury, replace
the batteries as soon as the low battery indicator
appears.
• Before using the clamp jaws to clamp the
conductor to be measured, make sure that all the
test leads have been removed from the clamp
meter.
• Remove test leads from the meter and remove the
clamp jaw from the clamped conductor before
opening the meter case or the battery door.
• Remaining endangerment: When an input terminal
is connected to dangerous live potential it is to be
noted that this potential at all other terminals can
occur!
• CATII - Measurement Category II is for
measurements performed on circuits directly
connected to low voltage installation. (Examples
are measurements on household appliances,
portable tools and similar equipment.) Do not use
the meter for measurements within Measurement
Categories III and IV.
CAUTION
To avoid possible damage to the meter or to the
equipment under test, follow these guidelines:
