Clarke 7623300, Operation & Maintenance Instructions Manual

Page: 4 / 12

4
6. DO NOT work under the raised vehicle until it is supported by suitable
means e.g. axle stands, NEVER rely on the jack to support the vehicle by
itself.
7. Never push a load off the jack or stands.
8. Ensure that all personnel are well clear of a load being raised or lowered.
9. DO NOT try to lift more then the rated load for the jack.
10. DO NOT use the jack if an oil leak is apparent. Consult your CLARKE dealer.
11. Consult the vehicle handbook to determine the correct lifting points.
12. Always watch the jack and the load during operation.
13. Check the condition of the labels regularly and replace as required.
14. The jack must be maintained and repaired by suitably qualified persons.
15. DO NOT make any modifications to the jack or adjust any valves.
BEFORE USE
1. Before use, attach the lifting
handle by clipping it over the two
large nuts at the main arm pivot.
2. Inspect the jack for oil leaks or any
sign of damage. If in doubt, do
not use. Should any defects be
apparent, have the jack repaired
by your CLARKE dealer.
3. Check the piston for dirt, rust etc
which can damage the piston
and internal components.
The jack is now ready to use.
USING THE TROLLEY JACK
1. Ensure the vehicle to be raised is stable and on firm level ground with the
wheels chocked with the chocks supplied.
WARNING: NEVER WORK ON THE VEHICLE WHEN SUPPORTED ONLY BY A
JACK. THIS IS HIGHLY DANGEROUS. THE VEHICLE MUST BE SUPPORTED ON
AXLE STANDS OR SUITABLE SUPPORTS BENEATH THE CORRECT JACKING/
SUPPORT POINTS.