Clarke 7623055, Operation & Maintenance Instructions Manual

Page: 3 / 13

3
SPECIFICATIONS
Model number CTJ5GLB
Part number 7623055
Length (not including handle): 1338 mm
Width 428 mm
Height 185 mm
Height of lifting cup (minimum) 165 mm
Height of lifting cup (maximum) 565 mm
Weight 85.5 kg
Rated Load 5 tonne
SAFETY PRECAUTIONS
1. This jack is for lifting only, do not move a load using the jack as a dolly.
2. Always inspect the jack before use. Make sure that all parts are in good
condition and operating smoothly, and that no cracks or distortion is apparent.
If in doubt do not use. Have the parts replaced or consult your CLARKE dealer.
3. Make sure that the jack is on a firm solid base, and there is no possibility of it
slipping when under load.
4. Make sure the load is taken by the full saddle and that the point of lift on the
load, is of sufficient strength to support the full load adequately.
5. Always use axle stands to stabilise the load once lifted. NEVER work on or under
a load unless it is fully and adequately supported. NEVER rely upon the jack to
hold the load in position.
6. Never push a load off the jack.
7. Ensure that all personnel are well clear of a load being raised, or lowered.
8. NEVER exceed the rated load for the jack (See “Specifications” on page 3.).
9. Do not use if an oil leak is apparent. Consult your Clarke dealer.
10. Consult the vehicle handbook to determine the correct lifting points.