8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
LOWERING THE LOAD
1. Pump the operating pedal to
raise the load slightly and release
the locking bar.
2. Push the locking bar against the
ram and into the locking bar
retaining clip
3. Press down on the release pedal
and allow the load to descend.
4. Remove the locking bar from the
locking bar retaining clip before
using the lift again.
MAINTENANCE
BEFORE EACH USE
Visually inspect the lift for distortion of parts, cracked welds, damaged wheels
or castors, oil leakage from the ram, or any other sign of damage. Should any
of these be found, do not use the lift, and have it inspected and repaired by a
qualified technician before putting back into use. If necessary, consult your
Clarke dealer.
If the Warning label becomes illegible, have it replaced. Contact your Clarke
dealer.
WARNING: TAKE GREAT CARE WHEN LOWERING. YOU ONLY NEED TO
PRESS THE RELEASE PEDAL VERY LIGHTLY. TOO HEAVY A TOUCH WILL
RESULT IN THE LOAD DESCENDING TOO RAPIDLY WHICH COULD BE
HAZARDOUS
Summary of Contents for 7610191
Page 12: ......
