22
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
STORAGE
ENGINE
See the separate engine manual supplied, for information regarding the stor-
age procedure.
PUMP
1. Drain all water from the high pressure hose, coil it and store it on the hose
holder, located on the rear of the power washer.
2. Drain all water from the spray gun and spray wand by holding the gun/
wand vertically with the nozzle pointing down, and pulling the trigger. Store
in the gun holder on the side of the power washer.
3. Store all other parts so that they are protected from damage.
4. Protect the power washer from freezing conditions to prevent damage to
the hoses, valves and pump.
STORAGE PROCEDURE
For long term storage, the petrol tank should be drained. Ensure that the
engine is cold before draining the tank. Remove the fuel tank cap and use a
pump type syphon to drain the petrol into an appropriate, clean container.
Dispose of excess petrol in an environmentally safe way. Your local recycling
centre can advise you on the best method of disposal. After the petrol tank
has been drained, start the engine and allow it to use any petrol that may
remain in the engine or fuel pipe. Make sure that the power washer has been
thoroughly cleaned before storing it in a clean dry place.
Summary of Contents for 7330347
Page 32: ......