13
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7.
7. O
nce the engine has warmed
up, slide the choke lever to the
OPEN position.
• The pressure washer is now
ready for use.
8. Release the trigger lock.
9. Ensuring that you have a firm
footing and that you are also
holding the gun assembly and
spray lance firmly, pull the trigger
on the gun to start water flow.
• The lance and gun will kick
back when the trigger is first
pulled.
INTERRUPTING OPERATION
1. Release the trigger.
NOTE:
The pressure washer will automatically go into bypass mod
e.
NOTE:
If you notice water coming from the drain tube attached to the pump,
please note that this is a safety feature and should be expected, it
cools the pump by releasing some of the hot water within the pump
and replacing it with fresh ‘cool’ water.
2. Rotate the trigger lock to the
locked position.
WARNING: ONCE THE PRESSURE WASHER ENGINE HAS STARTED, RELEASE
THE STARTING HANDLE SLOWLY TO AVOID INJURY/DAMAGE AS IT
RECOILS.
Summary of Contents for 7320207
Page 28: ......
