Clarke 7120330 Operation & Maintenance Instructions Manual Download Page 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this Clarke Water Pump.

Your CPE pump is a highly efficient, robust, continuously rated, self priming 
pump with a powerful electric motor, and is ideal for a wide range of 
domestic, commercial and agricultural uses. It is suitable for pumping clean 
tap and rain water, and will handle small solids in suspension. It is designed to 
give you trouble free service provided it is installed and used in the correct 
way. If the pump is left in an exposed position, it should be protected from the 
elements. especially frost.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

This water pump has been designed to give long and trouble free service. If, 
however, having followed the instructions in this booklet carefully, you 
encounter problems, take the unit to your local Clarke dealer.

Please keep these instructions in a safe place for future reference.

Summary of Contents for 7120330

















Reviews: