background image

5

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

POSITIONING

• This heater is designed for indoor use only.

• DO NOT place the heater close to a bath, wash basin, shower, swimming 

pool or any other water-filled area or wet surface. DO NOT place the 
heater up against any surface such as a wall, door or furniture etc.

• DO NOT place the heater immediately below any electrical outlet.

• NEVER place the heater near combustible materials such as curtains, 

furniture etc. Allow at least 2 metre clearance.

• DO NOT place the heater on a raised surface or anywhere where it 

could topple over.

• ALWAYS ensure that the grille cannot be blocked by curtains or other 

fabrics.

• DO NOT operate in explosive atmospheres such as in the presence of 

flammable liquids, gases or dust such as in a paint spray booth or any 
explosive environment. Electric motors create sparks which may ignite 
dust or fumes.

• DO NOT leave the heater un-attended, for example, left on at night.

COMMON SENSE

• DO NOT operate when you are tired or under the influence of alcohol, 

drugs or intoxicating medication.

• DO NOT stand on the heater.

• DO NOT use the heater with wet hands or when there is water on the 

power cable.

• Turn the heater off when not in use and keep it in a safe, dry, childproof 

location.

• The heater is designed to heat enclosed areas larger than 4m

3

, such as 

workshops and other industrial areas. Do not use the heater for any other 
function. It is not suitable for drying clothes or laundry.

• Young children must be kept away unless continuously supervised.

OPERATION

• The heater must only be used by persons who have read these 

instructions and have been trained in its use.

WARNING: DO NOT USE THE HEATER NEAR FLAMMABLE MATERIAL, 
LIQUIDS, SOLIDS, GASES OR COMPRESSED GAS CYLINDERS ETC.

Summary of Contents for 6925238













Reviews: