11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
FIRING MODES
ONE SHOT MODE
1. Set the firing mode switch to the
left (single firing).
• This mode is ideal for the
precision placement of the
fasteners
2. Push the safety yoke against the
work piece.
• The safety yoke must be
pressed against the work piece
before you pull the trigger.
3. Pull the trigger to fire the staple or
nail.
4. Release the trigger and lift the tool
away from the workpiece.
5. Repeat step 2 and step 3 to fire the next staple or nail.
CONTACT FIRING MODE
1. Push the firing mode switch to
right (contact firing).
• This mode is ideal for quick
firing.
2. Pull the trigger, keep squeezing
and don't release it.
3. Push the safety yoke against the
work piece to fire the nail or
staple.
4. Keep squeezing the trigger and
lift the tool away from the
workpiece.
5. To fire the next staple or nail,
repeat step 3.
To prevent accidental firing, Do not
pull the trigger when the tool is not in use.
Summary of Contents for 6487058
Page 16: ......