7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BEFORE USE
FITTING THE BATTERY
1. Slide the battery pack onto the
base of the handle until it ‘clicks’
into position.
REMOVE THE BATTERY
1. Press and hold the release button
on top of the battery.
2. Slide the battery away from the
base of the handle.
INSERTING DRILL BITS OR SCREWDRIVER BITS
1. Hold the chuck collar and twist
the front of the chuck in an anti-
clockwise direction.
2. Place the bit in the jaws as far as it
will go.
3. Hold the chuck collar and twist
the chuck sleeve in a clockwise
direction until it grips the bit tightly.
WARNING: BEFORE REMOVING ANY BITS, MAKE SURE THAT THE
FORWARD/REVERSE SWITCH IS IN THE CENTRAL LOCKED OFF POSITION.
CCD30Lic - 18V Hammer Drill.fm Page 7 Wednesday, October 3, 2018 3:15 PM
