12
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
USING THE SCROLL SAW
Before you start, turn the saw on and listen to the sound it makes. If you notice
excessive vibration or an unusual noise, stop the saw immediately and unplug
it. Do not start the saw until you have corrected the problem.
• It is possible that some blades will break whilst you learn how to use
and adjust the blade tension correctly.
• Hold the workpiece tightly against the saw table.
• Use light pressure and two hands when feeding the work piece into
the blade.
• Feed the work piece slowly towards the blade.
• Avoid awkward hand positions where a sudden slip can cause you
to touch the blade.
• Do not place your hands near the blade.
• When cutting an irregularly shaped workpiece, plan your cut so the
work piece will not pinch the blade.
THE CONTROLS
ON / OFF SWITCH
• To start the saw, push the ON
button.
• To stop, push the OFF button.
NOTE:
The scroll saw switches off
automatically if power is lost.
SPEED CONTROL
The speed control lets you select the correct blade speed for the material
being cut.
The speed range is 400 to 1,600 Strokes Per Minute.
• To increase the speed, turn the speed control clockwise.
• To decrease the speed, turn the speed control counterclockwise.
WARNING: BEFORE REMOVING OFFCUTS FROM THE TABLE, TURN THE SAW
OFF AND WAIT FOR THE BLADE TO COME TO A FULL STOP.
Summary of Contents for 6462153
Page 20: ......
